Beschreiwung

Enquête kontaktéieren

90 Degree Elbow SAE Flange ass e Wénkel Flangeverbindungsfitting deen benotzt gëtt fir d'hydraulesch Flowrichtung ëm 90 Grad z'änneren, während d'Schlauchversammlungen mat Pompelen, Ventile, Zylinder, Manifolden an aner hydraulesch Komponenten verbënnt.

product-1008-633

product-339-155

Flow Direktioun Virdeeler

Den 90 Grad Design miniméiert exzessiv Schlauchbéi bei Verbindungspunkten, hëlleft Belaaschtung op Schlauchverstäerkungsschichten ze reduzéieren an d'Installatiounszouverlässegkeet ze verbesseren.

Héich-Flow Passage

Compared with many threaded connections of the same nominal size, SAE flange connections provide a larger flow path for high-volume hydraulic circuits.

Available in SAE Code 61 and Code 62 configurations for hydraulic systems operating up to 420 bar (6,000 PSI) depending on size and pressure series.

Reliable O-Ring Sealing

The flange face utilizes O-ring sealing in accordance with SAE J518 / ISO 6162, helping maintain sealing performance under vibration and pressure fluctuations.

Fitting bodies are produced from hot-forged steel blanks to improve material continuity and reduce the risk of internal defects compared with fully machined components.

The flange face, bolt pattern, and connection geometry are CNC machined to maintain alignment accuracy between the hose end and flange interface.

O-Ring Groove Veraarbechtung

Dedicated machining programs are used to control groove dimensions required for proper O-ring compression.

Critical dimensions are verified against SAE J518 and ISO 6162 specifications before shipment.

Surface Finish Verifikatioun

D'Beschichtungserscheinung an d'Ofdeckung gi während der Produktioun iwwerpréift fir konsequent Korrosiounsschutz ze garantéieren.


	SAE Code 61, SAE Code 62
	DN12–DN51
	Carbon Steel, Stainless Steel 304, Stainless Steel 316
	Zinc Plated, Zinc-Nickel Plated
O-Ring Material

Markéierung

Kompakt hydraulesch Ausrüstung
Used where limited installation space prevents the use of straight flange connections.

Mobile Maschinnen
Commonly installed on excavators, loaders, cranes, and road construction equipment requiring directional hose routing.

Allows hose assemblies to be routed around pumps, manifolds, and valve blocks without excessive hose curvature.

Biergbau an Heavy Equipement
Suitable for hydraulic circuits operating under vibration, pressure pulsation, and continuous-duty conditions.

product-600-828

Q: Why use a 90-degree flange instead of a straight flange?

A: A 90-degree design helps redirect hose routing while reducing bending stress and installation space requirements around hydraulic components.

Q: What is the difference between Code 61 and Code 62?

A: Code 62 flanges are designed for higher-pressure applications, while Code 61 flanges are generally used in standard-pressure hydraulic systems.

A: Proper hose routing can reduce excessive bending near the connection point, which may help extend hose assembly service life.

Q: Sinn SAE Flange Dimensiounen standardiséiert?

A: Yes. SAE J518 and ISO 6162 establish standardized dimensions for flange interfaces, bolt patterns, and sealing arrangements.

A: Flange series, hose size, pressure requirement, material preference, and mating equipment specifications should be confirmed before ordering.

Hot Tags: 90℃elbow sae flange, China 90℃elbow sae flange manufacturers, factory

90 Degree Elbow SAE Flange

Flow Direktioun Virdeeler

Dir kënnt och gär hunn

Enquête kontaktéieren